Fish

.config/btop/btop.conf

@@ -0,0 +1,272 @@
+#? Config file for btop v.1.4.6
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "/home/arch/.config/btop/themes/tokyonight_storm.theme"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = true
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = true
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = false
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = false
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = false
+
+#* Show processes as a tree.
+proc_tree = false
+
+#* Use the cpu graph colors in the process list.
+proc_colors = true
+
+#* Use a darkening gradient in the process list.
+proc_gradient = true
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = false
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = true
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = true
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = false
+
+#* Show proc box on left side of screen instead of right.
+proc_left = false
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = false
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = true
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = false
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = false
+
+#* Shows the system uptime in the CPU box.
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
+
+#* Show cpu temperature.
+check_temp = true
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = true
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = false
+
+#* Show CPU frequency.
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = true
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = true
+
+#* Show mem box below net box instead of above.
+mem_below_net = false
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = true
+
+#* If swap memory should be shown in memory box.
+show_swap = true
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = true
+
+#* If mem box should be split to also show disks info.
+show_disks = true
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = true
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = true
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = false
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = false
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = true
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = false
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = false
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = true
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = true
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = true
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

.config/btop/themes/tokyonight_storm.theme

@@ -0,0 +1,73 @@
+# Theme: tokyonight_storm
+# By: Folke Lemaitre
+
+theme[main_bg]="#24283b"
+theme[main_fg]="#c0caf5"
+
+# Title color for boxes
+theme[title]="#c0caf5"
+
+# Highlight color for keyboard shortcuts
+theme[hi_fg]="#ff9e64"
+
+# Selected item in processes box
+theme[selected_bg]="#292e42"
+theme[selected_fg]="#7dcfff"
+
+# Misc colors for processes box including mini cpu graphs, details memory graph and details status text
+theme[proc_misc]="#7dcfff"
+
+# Cpu box outline color
+theme[cpu_box]="#29a4bd"
+
+# Memory/disks box outline color
+theme[mem_box]="#29a4bd"
+
+# Net up/down box outline color
+theme[net_box]="#29a4bd"
+
+# Processes box outline color
+theme[proc_box]="#29a4bd"
+
+# Box divider line and small boxes line color
+theme[div_line]="#29a4bd"
+
+# Temperature graph colors
+theme[temp_start]="#9ece6a"
+theme[temp_mid]="#e0af68"
+theme[temp_end]="#f7768e"
+
+# CPU graph colors
+theme[cpu_start]="#9ece6a"
+theme[cpu_mid]="#e0af68"
+theme[cpu_end]="#f7768e"
+
+# Mem/Disk free meter
+theme[free_start]="#9ece6a"
+theme[free_mid]="#e0af68"
+theme[free_end]="#f7768e"
+
+# Mem/Disk cached meter
+theme[cached_start]="#9ece6a"
+theme[cached_mid]="#e0af68"
+theme[cached_end]="#f7768e"
+
+# Mem/Disk available meter
+theme[available_start]="#9ece6a"
+theme[available_mid]="#e0af68"
+theme[available_end]="#f7768e"
+
+# Mem/Disk used meter
+theme[used_start]="#9ece6a"
+theme[used_mid]="#e0af68"
+theme[used_end]="#f7768e"
+
+# Download graph colors
+theme[download_start]="#9ece6a"
+theme[download_mid]="#e0af68"
+theme[download_end]="#f7768e"
+
+# Upload graph colors
+theme[upload_start]="#9ece6a"
+theme[upload_mid]="#e0af68"
+theme[upload_end]="#f7768e"

.config/fastfetch/config.jsonc

@@ -1,8 +1,8 @@
 {
   "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/master/doc/json_schema.json",
   "logo": {
-    "type": "kitty",
+    "type": "auto",
-    "source": "\"$(~/.config/fastfetch/term-test.sh)\"",
+    "source": "",
     "height": 19,
     "padding": {
       "top": 2,
@@ -67,7 +67,7 @@
     },
     {
       "type": "os",
-      "key": "\ue900 OS",
+      "key": " OS",
       "keyColor": "blue",
       "text": "{name}"
     },

.config/fish/config.fish

@@ -1,17 +1,12 @@
-function fish_greeting
+set -g theme_display_git_default_branch yes
-	fastfetch
+set -g theme_display_git_ahead_verbose yes
-	echo -e "\e[34m \e[39m""$(hyprctl splash)"
+set -g theme_display_git_dirty_verbose yes
-end
+set -g theme_nerd_fonts yes
+set -g theme_color_scheme dark
+set -g theme_display_user ssh
+set -g theme_show_exit_status yes
 
 if status is-interactive
 	alias ls lsd
 	alias vim nvim
-	set -g theme_display_git_default_branch yes
-	set -g theme_display_git_ahead_verbose yes
-	set -g theme_display_git_dirty_verbose yes
-	set -g theme_nerd_fonts yes
-	set -g theme_color_scheme dark
-	set -g theme_display_user ssh
-	set -g theme_show_exit_status yes
 end
-###

.config/fish/functions/fish_command_not_found.fish

@@ -0,0 +1,12 @@
+function fish_command_not_found
+    set cmd $argv
+
+		if set pkgs (pkgfile -bv -- "$cmd" 2>/dev/null)
+        printf '%s may be found in the following packages:\n' "$cmd"
+        for pkg in $pkgs
+            printf '  %s\n' "$pkg"
+        end
+		else
+			__fish_default_command_not_found_handler "$cmd"
+		end
+end

.config/fish/functions/fish_greeting.fish

@@ -0,0 +1,14 @@
+function fish_greeting
+	if test (string match -r 'kitty|ghostty' $TERM)
+		omf t bobthefish
+		fastfetch --logo-type kitty -l ~/.config/fastfetch/logo.png
+		if test $HYPRLAND_INSTANCE_SIGNATURE; echo -e "\e[34m \e[39m""$(hyprctl splash)"; end
+	else
+		if test $TERM = 'linux'
+			omf t ''
+			fastfetch -c none
+		else
+			fastfetch
+		end
+	end
+end

.config/kitty/cat.png

@@ -0,0 +1 @@
+../../.dotfiles/.config/kitty/cat.png

.config/kitty/current-theme.conf

@@ -0,0 +1,50 @@
+# vim:ft=kitty
+
+## name: Tokyo Night Storm
+## license: MIT
+## author: Folke Lemaitre
+## upstream: https://github.com/folke/tokyonight.nvim/raw/main/extras/kitty/tokyonight_storm.conf
+
+
+background #24283b
+foreground #c0caf5
+selection_background #2e3c64
+selection_foreground #c0caf5
+url_color #73daca
+cursor #c0caf5
+cursor_text_color #24283b
+
+# Tabs
+active_tab_background #7aa2f7
+active_tab_foreground #1f2335
+inactive_tab_background #292e42
+inactive_tab_foreground #545c7e
+#tab_bar_background #1d202f
+
+# Windows
+active_border_color #7aa2f7
+inactive_border_color #292e42
+
+# normal
+color0 #1d202f
+color1 #f7768e
+color2 #9ece6a
+color3 #e0af68
+color4 #7aa2f7
+color5 #bb9af7
+color6 #7dcfff
+color7 #a9b1d6
+
+# bright
+color8  #414868
+color9  #ff899d
+color10 #9fe044
+color11 #faba4a
+color12 #8db0ff
+color13 #c7a9ff
+color14 #a4daff
+color15 #c0caf5
+
+# extended colors
+color16 #ff9e64
+color17 #db4b4b

.config/kitty/kitty.conf

@@ -0,0 +1,4 @@
+include base.conf
+background_opacity 0.5
+transparent_background_colors #292E42@0.7 #2e3c64@0.9 #3B4261@0.7
+map f5 load_config_file /home/arch/.config/kitty/solid.conf

.config/kitty/solid.conf

@@ -0,0 +1,3 @@
+include base.conf
+background_opacity 1
+map f5 load_config_file /home/arch/.config/kitty/kitty.conf

.config/nvim/init.lua

@@ -0,0 +1,10 @@
+vim.o.number = true
+vim.o.relativenumber = true
+vim.o.cursorline = true
+vim.o.wrap = false
+vim.o.tabstop = 2
+vim.o.softtabstop = 2
+vim.o.shiftwidth = 2
+
+-- Plugins bootstrap
+require("config.lazy")

.config/nvim/lazy-lock.json

@@ -0,0 +1,6 @@
+{
+  "lazy.nvim": { "branch": "main", "commit": "306a05526ada86a7b30af95c5cc81ffba93fef97" },
+  "lualine.nvim": { "branch": "master", "commit": "47f91c416daef12db467145e16bed5bbfe00add8" },
+  "nvim-web-devicons": { "branch": "master", "commit": "746ffbb17975ebd6c40142362eee1b0249969c5c" },
+  "tokyonight.nvim": { "branch": "main", "commit": "5da1b76e64daf4c5d410f06bcb6b9cb640da7dfd" }
+}

.config/nvim/lua/config/lazy.lua

@@ -0,0 +1,29 @@
+-- Bootstrap lazy.nvim
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not (vim.uv or vim.loop).fs_stat(lazypath) then
+  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
+  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
+  if vim.v.shell_error ~= 0 then
+    vim.api.nvim_echo({
+      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
+      { out, "WarningMsg" },
+      { "\nPress any key to exit..." },
+    }, true, {})
+    vim.fn.getchar()
+    os.exit(1)
+  end
+end
+vim.opt.rtp:prepend(lazypath)
+
+-- Setup lazy.nvim
+require("lazy").setup({
+  spec = {
+    -- import plugins
+    { import = "plugins" },
+  },
+  -- Configure any other settings.
+  -- colorscheme that will be used when installing plugins.
+  install = { colorscheme = { "tokyonight" } },
+  -- automatically check for plugin updates
+  checker = { enabled = true, notify = true },
+})

.config/nvim/lua/plugins/line.lua

@@ -0,0 +1,62 @@
+return {
+	{
+		'nvim-lualine/lualine.nvim',
+		dependencies = { 'nvim-tree/nvim-web-devicons' },
+		opts = function()
+			return {
+				options = {
+					icons_enabled = true,
+					theme = 'auto',
+					component_separators = { left = '', right = ''},
+					section_separators = { left = '', right = ''},
+					disabled_filetypes = {
+						statusline = {},
+						winbar = {},
+					},
+					ignore_focus = {},
+					always_divide_middle = true,
+					always_show_tabline = true,
+					globalstatus = false,
+					refresh = {
+						statusline = 1000,
+						tabline = 1000,
+						winbar = 1000,
+						refresh_time = 16, -- ~60fps
+						events = {
+							'WinEnter',
+							'BufEnter',
+							'BufWritePost',
+							'SessionLoadPost',
+							'FileChangedShellPost',
+							'VimResized',
+							'Filetype',
+							'CursorMoved',
+							'CursorMovedI',
+							'ModeChanged',
+						},
+					},
+				},
+				sections = {
+					lualine_a = {'mode'},
+					lualine_b = {'branch', 'diff', 'diagnostics'},
+					lualine_c = {'filename'},
+					lualine_x = {'encoding', 'fileformat', 'filetype'},
+					lualine_y = {'progress'},
+					lualine_z = {'location'}
+				},
+				inactive_sections = {
+					lualine_a = {},
+					lualine_b = {},
+					lualine_c = {'filename'},
+					lualine_x = {'location'},
+					lualine_y = {},
+					lualine_z = {}
+				},
+				tabline = {},
+				winbar = {},
+				inactive_winbar = {},
+				extensions = {}
+			}
+		end
+	}
+}

.config/nvim/lua/plugins/theme.lua

@@ -0,0 +1,14 @@
+return {
+	{
+		"folke/tokyonight.nvim",
+		lazy = false,
+		priority = 1000,
+		opts = {},
+		config = function()
+			if os.getenv("TERM") ~= "linux" then
+				vim.cmd.colorscheme("tokyonight-storm")
+			end
+		end
+	}
+}
+

.config/omf/bundle

@@ -0,0 +1,4 @@
+theme agnoster
+theme bobthefish
+theme budspencer
+theme default

.config/omf/channel

@@ -0,0 +1 @@
+stable

.config/omf/theme

@@ -0,0 +1 @@
+bobthefish

.config/zellij/config.kdl

@@ -0,0 +1,536 @@
+//
+// THIS FILE WAS AUTOGENERATED BY ZELLIJ, THE PREVIOUS FILE AT THIS LOCATION WAS COPIED TO: /home/arch/.config/zellij/config.kdl.bak
+//
+theme "tokyonight_storm"
+keybinds clear-defaults=true {
+    locked {
+        bind "Ctrl g" { SwitchToMode "normal"; }
+    }
+    pane {
+        bind "left" { MoveFocus "left"; }
+        bind "down" { MoveFocus "down"; }
+        bind "up" { MoveFocus "up"; }
+        bind "right" { MoveFocus "right"; }
+        bind "c" { SwitchToMode "renamepane"; PaneNameInput 0; }
+        bind "d" { NewPane "down"; SwitchToMode "normal"; }
+        bind "e" { TogglePaneEmbedOrFloating; SwitchToMode "normal"; }
+        bind "f" { ToggleFocusFullscreen; SwitchToMode "normal"; }
+        bind "h" { MoveFocus "left"; }
+        bind "i" { TogglePanePinned; SwitchToMode "normal"; }
+        bind "j" { MoveFocus "down"; }
+        bind "k" { MoveFocus "up"; }
+        bind "l" { MoveFocus "right"; }
+        bind "n" { NewPane; SwitchToMode "normal"; }
+        bind "p" { SwitchFocus; }
+        bind "Ctrl p" { SwitchToMode "normal"; }
+        bind "r" { NewPane "right"; SwitchToMode "normal"; }
+        bind "s" { NewPane "stacked"; SwitchToMode "normal"; }
+        bind "w" { ToggleFloatingPanes; SwitchToMode "normal"; }
+        bind "z" { TogglePaneFrames; SwitchToMode "normal"; }
+    }
+    tab {
+        bind "left" { GoToPreviousTab; }
+        bind "down" { GoToNextTab; }
+        bind "up" { GoToPreviousTab; }
+        bind "right" { GoToNextTab; }
+        bind "1" { GoToTab 1; SwitchToMode "normal"; }
+        bind "2" { GoToTab 2; SwitchToMode "normal"; }
+        bind "3" { GoToTab 3; SwitchToMode "normal"; }
+        bind "4" { GoToTab 4; SwitchToMode "normal"; }
+        bind "5" { GoToTab 5; SwitchToMode "normal"; }
+        bind "6" { GoToTab 6; SwitchToMode "normal"; }
+        bind "7" { GoToTab 7; SwitchToMode "normal"; }
+        bind "8" { GoToTab 8; SwitchToMode "normal"; }
+        bind "9" { GoToTab 9; SwitchToMode "normal"; }
+        bind "[" { BreakPaneLeft; SwitchToMode "normal"; }
+        bind "]" { BreakPaneRight; SwitchToMode "normal"; }
+        bind "b" { BreakPane; SwitchToMode "normal"; }
+        bind "h" { GoToPreviousTab; }
+        bind "j" { GoToNextTab; }
+        bind "k" { GoToPreviousTab; }
+        bind "l" { GoToNextTab; }
+        bind "n" { NewTab; SwitchToMode "normal"; }
+        bind "r" { SwitchToMode "renametab"; TabNameInput 0; }
+        bind "s" { ToggleActiveSyncTab; SwitchToMode "normal"; }
+        bind "Ctrl t" { SwitchToMode "normal"; }
+        bind "x" { CloseTab; SwitchToMode "normal"; }
+        bind "tab" { ToggleTab; }
+    }
+    resize {
+        bind "left" { Resize "Increase left"; }
+        bind "down" { Resize "Increase down"; }
+        bind "up" { Resize "Increase up"; }
+        bind "right" { Resize "Increase right"; }
+        bind "+" { Resize "Increase"; }
+        bind "-" { Resize "Decrease"; }
+        bind "=" { Resize "Increase"; }
+        bind "H" { Resize "Decrease left"; }
+        bind "J" { Resize "Decrease down"; }
+        bind "K" { Resize "Decrease up"; }
+        bind "L" { Resize "Decrease right"; }
+        bind "h" { Resize "Increase left"; }
+        bind "j" { Resize "Increase down"; }
+        bind "k" { Resize "Increase up"; }
+        bind "l" { Resize "Increase right"; }
+        bind "Ctrl n" { SwitchToMode "normal"; }
+    }
+    move {
+        bind "left" { MovePane "left"; }
+        bind "down" { MovePane "down"; }
+        bind "up" { MovePane "up"; }
+        bind "right" { MovePane "right"; }
+        bind "h" { MovePane "left"; }
+        bind "Ctrl h" { SwitchToMode "normal"; }
+        bind "j" { MovePane "down"; }
+        bind "k" { MovePane "up"; }
+        bind "l" { MovePane "right"; }
+        bind "n" { MovePane; }
+        bind "p" { MovePaneBackwards; }
+        bind "tab" { MovePane; }
+    }
+    scroll {
+        bind "e" { EditScrollback; SwitchToMode "normal"; }
+        bind "s" { SwitchToMode "entersearch"; SearchInput 0; }
+    }
+    search {
+        bind "c" { SearchToggleOption "CaseSensitivity"; }
+        bind "n" { Search "down"; }
+        bind "o" { SearchToggleOption "WholeWord"; }
+        bind "p" { Search "up"; }
+        bind "w" { SearchToggleOption "Wrap"; }
+    }
+    session {
+        bind "a" {
+            LaunchOrFocusPlugin "zellij:about" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+        bind "c" {
+            LaunchOrFocusPlugin "configuration" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+        bind "Ctrl o" { SwitchToMode "normal"; }
+        bind "p" {
+            LaunchOrFocusPlugin "plugin-manager" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+        bind "s" {
+            LaunchOrFocusPlugin "zellij:share" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+        bind "w" {
+            LaunchOrFocusPlugin "session-manager" {
+                floating true
+                move_to_focused_tab true
+            }
+            SwitchToMode "normal"
+        }
+    }
+    shared_except "locked" {
+        bind "Alt left" { MoveFocusOrTab "left"; }
+        bind "Alt down" { MoveFocus "down"; }
+        bind "Alt up" { MoveFocus "up"; }
+        bind "Alt right" { MoveFocusOrTab "right"; }
+        bind "Alt +" { Resize "Increase"; }
+        bind "Alt -" { Resize "Decrease"; }
+        bind "Alt =" { Resize "Increase"; }
+        bind "Alt [" { PreviousSwapLayout; }
+        bind "Alt ]" { NextSwapLayout; }
+        bind "Alt f" { ToggleFloatingPanes; }
+        bind "Ctrl g" { SwitchToMode "locked"; }
+        bind "Alt h" { MoveFocusOrTab "left"; }
+        bind "Alt i" { MoveTab "left"; }
+        bind "Alt j" { MoveFocus "down"; }
+        bind "Alt k" { MoveFocus "up"; }
+        bind "Alt l" { MoveFocusOrTab "right"; }
+        bind "Alt n" { NewPane; }
+        bind "Alt o" { MoveTab "right"; }
+        bind "Alt p" { TogglePaneInGroup; }
+        bind "Alt Shift p" { ToggleGroupMarking; }
+        bind "Ctrl q" { Quit; }
+    }
+    shared_except "locked" "move" {
+        bind "Ctrl h" { SwitchToMode "move"; }
+    }
+    shared_except "locked" "session" {
+        bind "Ctrl o" { SwitchToMode "session"; }
+    }
+    shared_except "locked" "scroll" "search" "tmux" {
+        bind "Ctrl b" { SwitchToMode "tmux"; }
+    }
+    shared_except "locked" "scroll" "search" {
+        bind "Ctrl s" { SwitchToMode "scroll"; }
+    }
+    shared_except "locked" "tab" {
+        bind "Ctrl t" { SwitchToMode "tab"; }
+    }
+    shared_except "locked" "pane" {
+        bind "Ctrl p" { SwitchToMode "pane"; }
+    }
+    shared_except "locked" "resize" {
+        bind "Ctrl n" { SwitchToMode "resize"; }
+    }
+    shared_except "normal" "locked" "entersearch" {
+        bind "enter" { SwitchToMode "normal"; }
+    }
+    shared_except "normal" "locked" "entersearch" "renametab" "renamepane" {
+        bind "esc" { SwitchToMode "normal"; }
+    }
+    shared_among "pane" "tmux" {
+        bind "x" { CloseFocus; SwitchToMode "normal"; }
+    }
+    shared_among "scroll" "search" {
+        bind "PageDown" { PageScrollDown; }
+        bind "PageUp" { PageScrollUp; }
+        bind "left" { PageScrollUp; }
+        bind "down" { ScrollDown; }
+        bind "up" { ScrollUp; }
+        bind "right" { PageScrollDown; }
+        bind "Ctrl b" { PageScrollUp; }
+        bind "Ctrl c" { ScrollToBottom; SwitchToMode "normal"; }
+        bind "d" { HalfPageScrollDown; }
+        bind "Ctrl f" { PageScrollDown; }
+        bind "h" { PageScrollUp; }
+        bind "j" { ScrollDown; }
+        bind "k" { ScrollUp; }
+        bind "l" { PageScrollDown; }
+        bind "Ctrl s" { SwitchToMode "normal"; }
+        bind "u" { HalfPageScrollUp; }
+    }
+    entersearch {
+        bind "Ctrl c" { SwitchToMode "scroll"; }
+        bind "esc" { SwitchToMode "scroll"; }
+        bind "enter" { SwitchToMode "search"; }
+    }
+    renametab {
+        bind "esc" { UndoRenameTab; SwitchToMode "tab"; }
+    }
+    shared_among "renametab" "renamepane" {
+        bind "Ctrl c" { SwitchToMode "normal"; }
+    }
+    renamepane {
+        bind "esc" { UndoRenamePane; SwitchToMode "pane"; }
+    }
+    shared_among "session" "tmux" {
+        bind "d" { Detach; }
+    }
+    tmux {
+        bind "left" { MoveFocus "left"; SwitchToMode "normal"; }
+        bind "down" { MoveFocus "down"; SwitchToMode "normal"; }
+        bind "up" { MoveFocus "up"; SwitchToMode "normal"; }
+        bind "right" { MoveFocus "right"; SwitchToMode "normal"; }
+        bind "space" { NextSwapLayout; }
+        bind "\"" { NewPane "down"; SwitchToMode "normal"; }
+        bind "%" { NewPane "right"; SwitchToMode "normal"; }
+        bind "," { SwitchToMode "renametab"; }
+        bind "[" { SwitchToMode "scroll"; }
+        bind "Ctrl b" { Write 2; SwitchToMode "normal"; }
+        bind "c" { NewTab; SwitchToMode "normal"; }
+        bind "h" { MoveFocus "left"; SwitchToMode "normal"; }
+        bind "j" { MoveFocus "down"; SwitchToMode "normal"; }
+        bind "k" { MoveFocus "up"; SwitchToMode "normal"; }
+        bind "l" { MoveFocus "right"; SwitchToMode "normal"; }
+        bind "n" { GoToNextTab; SwitchToMode "normal"; }
+        bind "o" { FocusNextPane; }
+        bind "p" { GoToPreviousTab; SwitchToMode "normal"; }
+        bind "z" { ToggleFocusFullscreen; SwitchToMode "normal"; }
+    }
+}
+
+// Plugin aliases - can be used to change the implementation of Zellij
+// changing these requires a restart to take effect
+plugins {
+    about location="zellij:about"
+    compact-bar location="zellij:compact-bar"
+    configuration location="zellij:configuration"
+    filepicker location="zellij:strider" {
+        cwd "/"
+    }
+    plugin-manager location="zellij:plugin-manager"
+    session-manager location="zellij:session-manager"
+    status-bar location="zellij:status-bar"
+    strider location="zellij:strider"
+    tab-bar location="zellij:tab-bar"
+    welcome-screen location="zellij:session-manager" {
+        welcome_screen true
+    }
+}
+
+// Plugins to load in the background when a new session starts
+// eg. "file:/path/to/my-plugin.wasm"
+// eg. "https://example.com/my-plugin.wasm"
+load_plugins {
+}
+web_client {
+    font "monospace"
+}
+ 
+// Use a simplified UI without special fonts (arrow glyphs)
+// Options:
+//   - true
+//   - false (Default)
+// 
+// simplified_ui true
+ 
+// Choose the theme that is specified in the themes section.
+// Default: default
+// 
+// theme "dracula"
+ 
+// Choose the base input mode of zellij.
+// Default: normal
+// 
+// default_mode "locked"
+ 
+// Choose the path to the default shell that zellij will use for opening new panes
+// Default: $SHELL
+// 
+// default_shell "fish"
+ 
+// Choose the path to override cwd that zellij will use for opening new panes
+// 
+// default_cwd "/tmp"
+ 
+// The name of the default layout to load on startup
+// Default: "default"
+// 
+// default_layout "compact"
+ 
+// The folder in which Zellij will look for layouts
+// (Requires restart)
+// 
+// layout_dir "/tmp"
+ 
+// The folder in which Zellij will look for themes
+// (Requires restart)
+// 
+// theme_dir "/tmp"
+ 
+// Toggle enabling the mouse mode.
+// On certain configurations, or terminals this could
+// potentially interfere with copying text.
+// Options:
+//   - true (default)
+//   - false
+// 
+// mouse_mode false
+ 
+// Toggle having pane frames around the panes
+// Options:
+//   - true (default, enabled)
+//   - false
+// 
+// pane_frames false
+ 
+// When attaching to an existing session with other users,
+// should the session be mirrored (true)
+// or should each user have their own cursor (false)
+// (Requires restart)
+// Default: false
+// 
+// mirror_session true
+ 
+// Choose what to do when zellij receives SIGTERM, SIGINT, SIGQUIT or SIGHUP
+// eg. when terminal window with an active zellij session is closed
+// (Requires restart)
+// Options:
+//   - detach (Default)
+//   - quit
+// 
+// on_force_close "quit"
+ 
+// Configure the scroll back buffer size
+// This is the number of lines zellij stores for each pane in the scroll back
+// buffer. Excess number of lines are discarded in a FIFO fashion.
+// (Requires restart)
+// Valid values: positive integers
+// Default value: 10000
+// 
+// scroll_buffer_size 10000
+ 
+// Provide a command to execute when copying text. The text will be piped to
+// the stdin of the program to perform the copy. This can be used with
+// terminal emulators which do not support the OSC 52 ANSI control sequence
+// that will be used by default if this option is not set.
+// Examples:
+//
+// copy_command "xclip -selection clipboard" // x11
+// copy_command "wl-copy"                    // wayland
+// copy_command "pbcopy"                     // osx
+// 
+// copy_command "pbcopy"
+ 
+// Choose the destination for copied text
+// Allows using the primary selection buffer (on x11/wayland) instead of the system clipboard.
+// Does not apply when using copy_command.
+// Options:
+//   - system (default)
+//   - primary
+// 
+// copy_clipboard "primary"
+ 
+// Enable automatic copying (and clearing) of selection when releasing mouse
+// Default: true
+// 
+// copy_on_select true
+ 
+// Path to the default editor to use to edit pane scrollbuffer
+// Default: $EDITOR or $VISUAL
+// scrollback_editor "/usr/bin/vim"
+ 
+// A fixed name to always give the Zellij session.
+// Consider also setting `attach_to_session true,`
+// otherwise this will error if such a session exists.
+// Default: <RANDOM>
+// 
+// session_name "My singleton session"
+ 
+// When `session_name` is provided, attaches to that session
+// if it is already running or creates it otherwise.
+// Default: false
+// 
+// attach_to_session true
+ 
+// Toggle between having Zellij lay out panes according to a predefined set of layouts whenever possible
+// Options:
+//   - true (default)
+//   - false
+// 
+// auto_layout false
+ 
+// Whether sessions should be serialized to the cache folder (including their tabs/panes, cwds and running commands) so that they can later be resurrected
+// Options:
+//   - true (default)
+//   - false
+// 
+// session_serialization false
+ 
+// Whether pane viewports are serialized along with the session, default is false
+// Options:
+//   - true
+//   - false (default)
+// 
+// serialize_pane_viewport false
+ 
+// Scrollback lines to serialize along with the pane viewport when serializing sessions, 0
+// defaults to the scrollback size. If this number is higher than the scrollback size, it will
+// also default to the scrollback size. This does nothing if `serialize_pane_viewport` is not true.
+// 
+// scrollback_lines_to_serialize 10000
+ 
+// Enable or disable the rendering of styled and colored underlines (undercurl).
+// May need to be disabled for certain unsupported terminals
+// (Requires restart)
+// Default: true
+// 
+// styled_underlines false
+ 
+// How often in seconds sessions are serialized
+// 
+// serialization_interval 10000
+ 
+// Enable or disable writing of session metadata to disk (if disabled, other sessions might not know
+// metadata info on this session)
+// (Requires restart)
+// Default: false
+// 
+// disable_session_metadata false
+ 
+// Enable or disable support for the enhanced Kitty Keyboard Protocol (the host terminal must also support it)
+// (Requires restart)
+// Default: true (if the host terminal supports it)
+// 
+// support_kitty_keyboard_protocol false
+// Whether to make sure a local web server is running when a new Zellij session starts.
+// This web server will allow creating new sessions and attaching to existing ones that have
+// opted in to being shared in the browser.
+// When enabled, navigate to http://127.0.0.1:8082
+// (Requires restart)
+// 
+// Note: a local web server can still be manually started from within a Zellij session or from the CLI.
+// If this is not desired, one can use a version of Zellij compiled without
+// `web_server_capability`
+// 
+// Possible values:
+// - true
+// - false
+// Default: false
+// 
+// web_server false
+// Whether to allow sessions started in the terminal to be shared through a local web server, assuming one is
+// running (see the `web_server` option for more details).
+// (Requires restart)
+// 
+// Note: This is an administrative separation and not intended as a security measure.
+// 
+// Possible values:
+// - "on" (allow web sharing through the local web server if it
+// is online)
+// - "off" (do not allow web sharing unless sessions explicitly opt-in to it)
+// - "disabled" (do not allow web sharing and do not permit sessions started in the terminal to opt-in to it)
+// Default: "off"
+// 
+// web_sharing "off"
+// A path to a certificate file to be used when setting up the web client to serve the
+// connection over HTTPs
+// 
+// web_server_cert "/path/to/cert.pem"
+// A path to a key file to be used when setting up the web client to serve the
+// connection over HTTPs
+// 
+// web_server_key "/path/to/key.pem"
+/// Whether to enforce https connections to the web server when it is bound to localhost
+/// (127.0.0.0/8)
+///
+/// Note: https is ALWAYS enforced when bound to non-local interfaces
+///
+/// Default: false
+// 
+// enforce_https_for_localhost false
+ 
+// Whether to stack panes when resizing beyond a certain size
+// Default: true
+// 
+// stacked_resize false
+ 
+// Whether to show tips on startup
+// Default: true
+// 
+show_startup_tips false
+ 
+// Whether to show release notes on first version run
+// Default: true
+// 
+// show_release_notes false
+ 
+// Whether to enable mouse hover effects and pane grouping functionality
+// default is true
+// advanced_mouse_actions false
+ 
+// The ip address the web server should listen on when it starts
+// Default: "127.0.0.1"
+// (Requires restart)
+// web_server_ip "127.0.0.1"
+ 
+// The port the web server should listen on when it starts
+// Default: 8082
+// (Requires restart)
+// web_server_port 8082
+ 
+// A command to run (will be wrapped with sh -c and provided the RESURRECT_COMMAND env variable) 
+// after Zellij attempts to discover a command inside a pane when resurrecting sessions, the STDOUT
+// of this command will be used instead of the discovered RESURRECT_COMMAND
+// can be useful for removing wrappers around commands
+// Note: be sure to escape backslashes and similar characters properly
+// post_command_discovery_hook "echo $RESURRECT_COMMAND | sed <your_regex_here>"

.config/zellij/themes/tokyonight_storm.kdl

@@ -0,0 +1,22 @@
+// Tokyonight Zellij Colors
+// Add this file to your `CONFIG_DIR/themes` directory as described here:
+// https://zellij.dev/documentation/themes#getting-zellij-to-pick-up-the-theme
+
+themes {
+    tokyonight_storm {
+        fg "#c0caf5"
+        bg "#292e42"
+        // Black should match the terminal background color
+        // This ensures the top and bottom bars are transparent
+        black "#24283b"
+        red "#f7768e"
+        green "#9ece6a"
+        yellow "#e0af68"
+        blue "#7aa2f7"
+        magenta "#bb9af7"
+        cyan "#7dcfff"
+        white "#a9b1d6"
+        orange "#ff9e64"
+    }
+}
+