nvim btop

btop/.config/btop/btop.conf

@@ -0,0 +1,272 @@
+#? Config file for btop v.1.4.6
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "/home/arch/.config/btop/themes/tokyonight_storm.theme"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = true
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = true
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = false
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = false
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu direct"
+
+#* Reverse sorting order, True or False.
+proc_reversed = false
+
+#* Show processes as a tree.
+proc_tree = false
+
+#* Use the cpu graph colors in the process list.
+proc_colors = true
+
+#* Use a darkening gradient in the process list.
+proc_gradient = true
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = false
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = true
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = true
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = false
+
+#* Show proc box on left side of screen instead of right.
+proc_left = false
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = false
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = true
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = false
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = false
+
+#* Shows the system uptime in the CPU box.
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
+
+#* Show cpu temperature.
+check_temp = true
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = true
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = false
+
+#* Show CPU frequency.
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = true
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = true
+
+#* Show mem box below net box instead of above.
+mem_below_net = false
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = true
+
+#* If swap memory should be shown in memory box.
+show_swap = true
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = true
+
+#* If mem box should be split to also show disks info.
+show_disks = true
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = true
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = true
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = false
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = false
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = true
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = false
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = false
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = true
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = true
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = true
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

btop/.config/btop/themes/tokyonight_storm.theme

@@ -0,0 +1,73 @@
+# Theme: tokyonight_storm
+# By: Folke Lemaitre
+
+theme[main_bg]="#24283b"
+theme[main_fg]="#c0caf5"
+
+# Title color for boxes
+theme[title]="#c0caf5"
+
+# Highlight color for keyboard shortcuts
+theme[hi_fg]="#ff9e64"
+
+# Selected item in processes box
+theme[selected_bg]="#292e42"
+theme[selected_fg]="#7dcfff"
+
+# Misc colors for processes box including mini cpu graphs, details memory graph and details status text
+theme[proc_misc]="#7dcfff"
+
+# Cpu box outline color
+theme[cpu_box]="#29a4bd"
+
+# Memory/disks box outline color
+theme[mem_box]="#29a4bd"
+
+# Net up/down box outline color
+theme[net_box]="#29a4bd"
+
+# Processes box outline color
+theme[proc_box]="#29a4bd"
+
+# Box divider line and small boxes line color
+theme[div_line]="#29a4bd"
+
+# Temperature graph colors
+theme[temp_start]="#9ece6a"
+theme[temp_mid]="#e0af68"
+theme[temp_end]="#f7768e"
+
+# CPU graph colors
+theme[cpu_start]="#9ece6a"
+theme[cpu_mid]="#e0af68"
+theme[cpu_end]="#f7768e"
+
+# Mem/Disk free meter
+theme[free_start]="#9ece6a"
+theme[free_mid]="#e0af68"
+theme[free_end]="#f7768e"
+
+# Mem/Disk cached meter
+theme[cached_start]="#9ece6a"
+theme[cached_mid]="#e0af68"
+theme[cached_end]="#f7768e"
+
+# Mem/Disk available meter
+theme[available_start]="#9ece6a"
+theme[available_mid]="#e0af68"
+theme[available_end]="#f7768e"
+
+# Mem/Disk used meter
+theme[used_start]="#9ece6a"
+theme[used_mid]="#e0af68"
+theme[used_end]="#f7768e"
+
+# Download graph colors
+theme[download_start]="#9ece6a"
+theme[download_mid]="#e0af68"
+theme[download_end]="#f7768e"
+
+# Upload graph colors
+theme[upload_start]="#9ece6a"
+theme[upload_mid]="#e0af68"
+theme[upload_end]="#f7768e"

nvim/.config/nvim/init.lua

@@ -0,0 +1,11 @@
+vim.o.number = true
+vim.o.relativenumber = true
+vim.o.cursorline = true
+vim.o.wrap = false
+vim.o.tabstop = 2
+vim.o.softtabstop = 2
+vim.o.shiftwidth = 2
+vim.g.mapleader = " "
+
+-- Plugins bootstrap
+require("config.lazy")

nvim/.config/nvim/lazy-lock.json

@@ -0,0 +1,11 @@
+{
+  "colorviewer.nvim": { "branch": "main", "commit": "7e3fcff372c68526d85028053199721b635d83a1" },
+  "lazy.nvim": { "branch": "main", "commit": "306a05526ada86a7b30af95c5cc81ffba93fef97" },
+  "lualine.nvim": { "branch": "master", "commit": "47f91c416daef12db467145e16bed5bbfe00add8" },
+  "noice.nvim": { "branch": "main", "commit": "7bfd942445fb63089b59f97ca487d605e715f155" },
+  "nui.nvim": { "branch": "main", "commit": "de740991c12411b663994b2860f1a4fd0937c130" },
+  "nvim-notify": { "branch": "master", "commit": "8701bece920b38ea289b457f902e2ad184131a5d" },
+  "nvim-web-devicons": { "branch": "master", "commit": "737cf6c657898d0c697311d79d361288a1343d50" },
+  "tokyonight.nvim": { "branch": "main", "commit": "5da1b76e64daf4c5d410f06bcb6b9cb640da7dfd" },
+  "which-key.nvim": { "branch": "main", "commit": "3aab2147e74890957785941f0c1ad87d0a44c15a" }
+}

nvim/.config/nvim/lua/config/lazy.lua

@@ -0,0 +1,30 @@
+-- Bootstrap lazy.nvim
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not (vim.uv or vim.loop).fs_stat(lazypath) then
+  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
+  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
+  if vim.v.shell_error ~= 0 then
+    vim.api.nvim_echo({
+      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
+      { out, "WarningMsg" },
+      { "\nPress any key to exit..." },
+    }, true, {})
+    vim.fn.getchar()
+    os.exit(1)
+  end
+end
+vim.opt.rtp:prepend(lazypath)
+
+-- Setup lazy.nvim
+
+require("lazy").setup({
+  spec = {
+    -- import plugins
+    { import = "plugins" },
+  },
+  -- Configure any other settings.
+  -- colorscheme that will be used when installing plugins.
+  install = { colorscheme = { "tokyonight" } },
+  -- automatically check for plugin updates
+  checker = { enabled = true, notify = true },
+})

nvim/.config/nvim/lua/plugins/color-viewer.lua

@@ -0,0 +1,8 @@
+return {
+	'Godswill-255/colorviewer.nvim',
+	config = function()
+		require('colorviewer').setup({
+			symbol = "■",
+		})
+	end
+}

nvim/.config/nvim/lua/plugins/line.lua

@@ -0,0 +1,62 @@
+return {
+	{
+		'nvim-lualine/lualine.nvim',
+		dependencies = { 'nvim-tree/nvim-web-devicons' },
+		opts = function()
+			return {
+				options = {
+					icons_enabled = true,
+					theme = 'auto',
+					component_separators = { left = '', right = ''},
+					section_separators = { left = '', right = ''},
+					disabled_filetypes = {
+						statusline = {},
+						winbar = {},
+					},
+					ignore_focus = {},
+					always_divide_middle = true,
+					always_show_tabline = true,
+					globalstatus = false,
+					refresh = {
+						statusline = 1000,
+						tabline = 1000,
+						winbar = 1000,
+						refresh_time = 16, -- ~60fps
+						events = {
+							'WinEnter',
+							'BufEnter',
+							'BufWritePost',
+							'SessionLoadPost',
+							'FileChangedShellPost',
+							'VimResized',
+							'Filetype',
+							'CursorMoved',
+							'CursorMovedI',
+							'ModeChanged',
+						},
+					},
+				},
+				sections = {
+					lualine_a = {'mode'},
+					lualine_b = {'branch', 'diff', 'diagnostics'},
+					lualine_c = {'filename'},
+					lualine_x = {'encoding', 'fileformat', 'filetype'},
+					lualine_y = {'progress'},
+					lualine_z = {'location'}
+				},
+				inactive_sections = {
+					lualine_a = {},
+					lualine_b = {},
+					lualine_c = {'filename'},
+					lualine_x = {'location'},
+					lualine_y = {},
+					lualine_z = {}
+				},
+				tabline = {},
+				winbar = {},
+				inactive_winbar = {},
+				extensions = {}
+			}
+		end
+	}
+}

nvim/.config/nvim/lua/plugins/noice.lua

@@ -0,0 +1,15 @@
+return {
+  "folke/noice.nvim",
+  event = "VeryLazy",
+  opts = {
+    -- add any options here
+  },
+  dependencies = {
+    -- if you lazy-load any plugin below, make sure to add proper `module="..."` entries
+    "MunifTanjim/nui.nvim",
+    -- OPTIONAL:
+    --   `nvim-notify` is only needed, if you want to use the notification view.
+    --   If not available, we use `mini` as the fallback
+    "rcarriga/nvim-notify",
+    }
+}

nvim/.config/nvim/lua/plugins/theme.lua

@@ -0,0 +1,14 @@
+return {
+	{
+		"folke/tokyonight.nvim",
+		lazy = false,
+		priority = 1000,
+		opts = {},
+		config = function()
+			if os.getenv("TERM") ~= "linux" then
+				vim.cmd.colorscheme("tokyonight-storm")
+			end
+		end
+	}
+}
+

nvim/.config/nvim/lua/plugins/which-key.lua

@@ -0,0 +1,18 @@
+return {
+  "folke/which-key.nvim",
+  event = "VeryLazy",
+  opts = {
+    -- your configuration comes here
+    -- or leave it empty to use the default settings
+    -- refer to the configuration section below
+  },
+  keys = {
+    {
+      "<leader>?",
+      function()
+        require("which-key").show({ global = false })
+      end,
+      desc = "Buffer Local Keymaps (which-key)"
+    }
+  },
+}